VX8300
Based on the principle of visual measurement with precision image analysis algorithms and equipped with a high depth-of-field double telecentric optical lens, the VX8000 series flash measuring machines enable fast dimensional measurement at the touch of a button.
The VX8000 series is ideal for precise dimensional measurement in machinery, electronics, molds, injection molding, hardware, rubber, low-voltage appliances, magnetic materials, precision stamping, connectors, terminals, mobile phones, household appliances, printed circuit boards, medical equipment, watches, cutting tools, etc.
- Image sensor: 20 MP CMOS
- Field of view: 300 x 200 mm (wide field) / 230 x 130 mm (high precision)
- Resolution: 0.1 μm
- Load capacity: 7.5 kg
- Dimensions (length x width x height): 531 × 503 × 731 mm
- Weight: 75 kg
| Features | |
|---|---|
| Model | VX8300 |
| Image Sensor | 20MP CMOS |
| Monitor | Built-in 10.4" LCD (XGA:1024×768) - Outside 24" LCD (XGA:1920×1080)(Optional) |
| Acceptance Lens | Double Tlecentric Lens |
| Light | Ring Light - Four-segment illumination(White Light) |
| Telecentric transmission illumination(Green Light) | |
| Coaxial Light(optional) LED parallel light | |
| F.O.V. | Wide Field 300*200mm |
| High Precision 230*130mm | |
| Resolution | 0.1um |
| Repeatability of Image Meas. | Wide Field Without Stitching* ±0.1um |
| Wide Field With Stitching* ±2um | |
| High Precision Without Stitching* ±0.5um | |
| High Precision With Stitching* ±1.5um | |
| Accuracy of Image Meas. | Wide Field Without Stitching* ±3um |
| Wide Field With Stitching* ±(5 0.02L)μm | |
| High Precision Without Stitching* ±1.5um | |
| High Precision With Stitching* ±(3 0.02L)μm | |
| Horizontal Rotary Unit (Optional) | Rotation Angle Range 360°, Resolution 0.02° |
| Rotation Speed 0.2~2rev/s | |
| Max Diameter | Max Diameter Φ60mm |
| Height Meas. Optical probe) (Optional) | Measuring Range(XY) 120×110mm |
| Max Hole-Depth Ratio(h/φ) 1.64 | |
| Dia. of Beam Φ100μm(Φ18μm optional) | |
| Resolution 0.25μm | |
| Z Non-movement Range(Z) ±2mm - Accuracy ±2μm | |
| Z Movement Range(Z) 75mm - Accuracy ±(6 0.01H)μm, H is Z moving height in mm | |
| XY Object Table | X Travel range 210mm |
| Y Travel range 110mm | |
| Loading Capacity 7.5kg | |
| Z-Axis Travel range | 75mm |
| Size(LxWxH) | 531×503×731mm |
| Weight | 75kg |
| Input | AC100~240V, 50/60Hz, 2A, 300W |
| Working Environment | Temp.10 |
Observations:
* 1 In the focusing position, the ambient temperature is 20 °C ± 1.0 °C
* 2 In the focusing position, the ambient temperature is 20 °C ± 1.0 °C and the load on the table is 2 kg or less; L is the range of movement of the table (mm)
Applications
VisionX software provides up to 80 extraction analysis tools, including [Feature Extraction] (such as maximum points, centerlines, arcs, peaks, etc.), [Accessory Tools] (such as any point, line and circle, fitted straight line, fitted circle, tangent, inscribed circle, etc.), [Intelligent Labeling], [Form Tolerance], and special [Application Tools] (such as pitch distance, pitch angle, groove, thread, round cross, downward angle, rounded corners, etc.).
The measurement results and their main statistical values (such as average, σ, 3σ, 6σ, Ca, Cp, Cpk, etc.) will be automatically recorded and archived. Operators can select different filter conditions for extracting the historical data.
Statistics
The trend chart shows the typical evolution of measured values, such as monotonic or periodic changes, and can be used to monitor potential anomalies in the production process or manufacturing equipment. The histogram reflects the status and distribution of fluctuations in product quality, allowing for an intuitive visualization of the quality situation during the production process, as well as predicting product quality and failure rates.
Through diagnosis and quality analysis using statistical methods, SPC allows monitoring of product quality and the evolution of the production process.
Thanks to SPC, it's possible to implement preventative solutions during the production process, reducing subsequent inspections and repairs. As a result, better control of the manufacturing process and continuous improvement in product quality are achieved.
Statistics
You may also be interested in:
